When Your Water Heater Quits: Immediate Action Guide
When Your Water Heater Quits: Immediate Action Guide
Blog Article
We have found this article about What Would Cause My Electric Water Heater to Stop Working? listed below on the internet and felt it made good sense to relate it with you here.
Several contemporary homes use an electric hot water heater for their heating system, due to its ease and ease of use. Nonetheless, similar to any other electric appliances, issues may develop with its use, all of a sudden. It can be actually frustrating to get up to a cold shower instead of a hot one or having your bathroom with water that isn't warm sufficient and even also warm. Whatever the case might be, hot water heater issues can be quite nerve-racking. Luckily, we have actually made a list of feasible solutions to your hot water heater problems. There are a variety of factors that can trigger a lot of these troubles, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the major power supply for security. Whatever the issue is, getting it taken care of must not position too much of a concern if you follow these actions:
Call An Expert:
If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you might require to speak to a specialist plumber for an expert point of view. The issue with your heating system could be that the cold and hot faucets have actually been switched over or it may be undersized for the amount of hot water needed in your house. Whatever the situation might be, a professional plumber would assist solve the issue.
Check Your Power Supply:
As standard as this may seem, it is really necessary. Without sufficient power, your hot water heater will not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, merely turn it on and off once again. Change any type of busted or damaged fuse. Test the device with power after these adjustments to see if it's now functioning.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot sufficient, you may require to examine the temperature settings on your top thermostat. Guarantee the circuit breaker is turned off before doing anything. Open up the accessibility panel as well as press the red button for temperature level reset over the thermostat. This should help heat up the water. Turn the circuit breaker back on as well as inspect if the trouble has been fixed.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that attempt looking into your burner if it is still working. Test each of your heating elements to make sure the issue isn't with any one of them. If any of them is faulty, change that part and after that examine whether the hot water is back on.
Verdict
Water heater troubles are not always major. Much of them are because of small problems like a blown fuse or damaged burner. Changing the malfunctioning components ought to do the trick. However, if you are still incapable to address the trouble, give a call to your closest plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our excerpt on What Would Cause My Electric Water Heater to Stop Working?. Thank you for taking the time to browse our content. Appreciated our post? Please share it. Let other people check it out. Thanks for taking the time to read it.
Article Report this page